LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (Fuel Charging And Controls - Turbocharger - INGENIUM I4 2.0L Diesel -- XE/(760)) >> Fuel Charging And Controls - Turbocharger - INGENIUM I4 2.0L Diesel (G1821579) >> Removal And Installation >> Low Pressure Oil Supply Pipe - INGENIUM I4 2.0L Diesel - High Power (G1933087) >> Installation

Low Pressure Oil Supply Pipe - INGENIUM I4 2.0L Diesel - High Power (G1933087): Installation

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
    • Install new banjo bolt washers.

      Renew Part: Turbocharger oil feed pipe banjo bolt washers  Quantity: 4. 

    • Install the turbocharger oil feed pipe.

    Torque  : 18Nm 

    • Install new O-ring seals.

      Renew Part: Breather hose O-ring seal  Quantity: 2. 

    • Install the breather hose.

    Torque  : 12Nm 

  1. Install the intake air resonator.

    Refer to: INTAKE AIR RESONATOR

  2. Check and top up the engine oil level.

    Refer to: SPECIFICATIONS