Crankshaft Front Seal (G1817145): Installation
WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
Using the special tool install a new front crankshaft seal.
Special Tool(s): JLR-303-1628
Renew Part: Crankshaft front oil seal Quantity: 1 .
Torque : 26Nm
- Install the crankshaft pulley.
Refer to: CRANKSHAFT PULLEY
- Connect the startup battery ground cable.
Refer to: STARTUP BATTERY DISCONNECT AND CONNECT