LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 204 (Brake System - General Information -- XE/(760)) >> Brake System - General Information (G1817244) >> Diagnosis And Testing >> Brake System - Project 8 (G2256302) >> Pinpoint Tests >> Pinpoint Test A: Brakes Noisy

Pinpoint Test A: Brakes Noisy

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. A1: INSPECT BRAKE PADS 
    1. Inspect the condition of the front and rear brake pads. Check for damage to any anti-squeal shims

    Are the brake pads OK?

    Yes 

    GO to  A2.

    No 

    CLEAN the front brake pads or INSTALL new front brake pads if necessary. Refer to: BRAKE PADS - PROJECT 8 CLEAN the rear brake pads or INSTALL new rear brake pads if necessary. Refer to: BRAKE PADS - PROJECT 8 Test vehicle for presence of brake squeal

  2. A2: INSPECT BRAKE DISCS 
    1. Inspect the brake discs for excessive corrosion, wear or disc thickness variation

    Does excessive corrosion, wear or disc thickness variation exist?

    Yes 

    INSTALL new front brake discs and brake pads. INSTALL new rear brake discs and brake pads. Refer to: BRAKE PADS - PROJECT 8 and BRAKE DISC - PROJECT 8 TEST the system for normal operation

    No 

    Vehicle is OK

scientia non olet · About LEMON Manuals