Brake Caliper - INGENIUM I4 2.0L Diesel (G1822042): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Inspect the caliper piston and slide pin seals for damage.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Torque : 33Nm
CAUTION:
- Inspect the brake hose sealing washers for signs of damage, if damage is present install new sealing washers.
- Make sure that the brake hose is not twisted and is correctly located.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Install the flexible brake hose.

Torque

Brake pipe union: 15Nm

Banjo bolt: 32Nm
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
Bleed the braking system.
Refer to: BRAKE SYSTEM BLEEDING
Install the wheel and tire.
Refer to: WHEEL AND TIRE