LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (Electronic Engine Controls - V8 S/C 5.0L Petrol, Project 8 -- XE/(760)) >> Electronic Engine Controls - V8 S/C 5.0L Petrol, Project 8 (G2261903) >> Removal And Installation >> Right Camshaft Position Sensor (G2244146) >> Installation

Right Camshaft Position Sensor (G2244146): Installation

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
    • Install the 2 Camshaft Position (CMP) sensors.
    • Install the 2 CMP retaining bolts.

      Torque  : 10Nm 

    • Connect the 2 CMP sensor electrical connectors.
  2. Secure the coolant hose.
    • Connect the 2 right supercharger coolant hoses.
    • Secure the 2 retaining clips.
  4. Install the right air cleaner outlet intermediate pipe.

    Refer to: AIR FILTER OUTLET PIPE T-CONNECTOR

  5. Vacuum fill the cooling system.

    Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING

scientia non olet · About LEMON Manuals