LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (Electronic Engine Controls - V8 S/C 5.0L Petrol, Project 8 -- XE/(760)) >> Electronic Engine Controls - V8 S/C 5.0L Petrol, Project 8 (G2261903) >> Removal And Installation >> Mass Air Flow Sensor (G2244158) >> Installation

Mass Air Flow Sensor (G2244158): Installation

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
    • Install the new O-ring seal.

      Renew Part: Mass air flow sensor O-ring seal  Quantity: 1  .

    • Install the MAF  sensor.
    • Install and tighten the 2 screws.

      Torque  : 5Nm 

    • Connect the electrical connector to the MAF  sensor.
    • Connect the clean air duct to the MAF  sensor.
    • Tighten the clamp.

    Torque  : 3.5Nm 

scientia non olet · About LEMON Manuals