LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (Electronic Engine Controls - V8 S/C 5.0L Petrol, Project 8 -- XE/(760)) >> Electronic Engine Controls - V8 S/C 5.0L Petrol, Project 8 (G2261903) >> Removal And Installation >> Manifold Absolute Pressure Sensor (G2271922) >> Installation

Manifold Absolute Pressure Sensor (G2271922): Installation

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. G14005735Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Install the Manifold Absolute Pressure (MAP) sensor.
    • Install and tighten the MAP sensor bolt.

    Torque  : 5Nm 

  2. G14005734Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Connect the MAP sensor electrical connector.

  3. Install the secondary bulkhead left inner panel.

    Refer to: SECONDARY BULKHEAD LEFT INNER PANEL - PROJECT 8

  4. Install the secondary bulkhead left outer panel.

    Refer to: SECONDARY BULKHEAD LEFT OUTER PANEL - PROJECT 8

scientia non olet · About LEMON Manuals