LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (Electronic Engine Controls - V8 S/C 5.0L Petrol, Project 8 -- XE/(760)) >> Electronic Engine Controls - V8 S/C 5.0L Petrol, Project 8 (G2261903) >> Removal And Installation >> Engine Coolant Temperature Sensor (G2249553) >> Installation

Engine Coolant Temperature Sensor (G2249553): Installation

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
    • Install the engine coolant temperature sensor.
    • Connect the electrical connector.
  2. Install the secondary bulkhead right inner panel.

    Refer to: SECONDARY BULKHEAD RIGHT INNER PANEL - PROJECT 8

  3. Vacuum fill the engine cooling system.

    Refer to: COOLING SYSTEM DRAINING AND VACUUM FILLING

scientia non olet · About LEMON Manuals