LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (Electronic Engine Controls - V8 S/C 5.0L Petrol, Project 8 -- XE/(760)) >> Electronic Engine Controls - V8 S/C 5.0L Petrol, Project 8 (G2261903) >> Removal And Installation >> Crankshaft Position Sensor (G2244150) >> Installation

Crankshaft Position Sensor (G2244150): Installation

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
    • Install the crankshaft position (CKP) sensor.
    • Install the bolt.

      Torque  : 10Nm 

    • Connect the electrical connector.
  2. Install the transmission undershield.

    Refer to: TRANSMISSION UNDERSHIELD - PROJECT 8

scientia non olet · About LEMON Manuals