Vehicle Interior (G2245321): Notes

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

Remove and discard the interior protection following local regulations and inspect the interior for damage.
Configure the vehicle to market and set Customer/Retailer options using the Instrument Pack.

NOTE: Before configuring the vehicle, the vehicle must be powered down for 10 minutes.

The power down sequence must be followed to allow the instrument pack and touch screen to be configured correctly.

Make sure bonnet and all doors are closed.
Using the smart key lock the vehicle.
Wait 10 minutes.
The vehicle will have fully powered down.
Unlock the vehicle.
Switch the ignition on.