LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 194 (Driveshaft -- XE/(760)) >> Driveshaft (G1817223) >> Removal And Installation >> Front Driveshaft - Project 8 (G2257336) >> Installation

Front Driveshaft - Project 8 (G2257336): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Apply the required quantity of grease meeting the correct specification.

    Install the front driveshaft.

    Refer to: SPECIFICATIONS 

  2. NOTE: Make sure that you re-align the driveshaft to the transmission flange using the alignment mark.

    Install the 4 new bolts.

    Renew Part: Driveshaft to front output flange bolts  Quantity: 4. 

    Torque 

    Stage 1: 40Nm 

    Stage 2: 90° 

  3. Install the transmission undersheild.

    Refer to: TRANSMISSION UNDERSHIELD - PROJECT 8

scientia non olet · About LEMON Manuals