Piston Cooling Oil Jet Solenoid (G2130910): Removal
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
- This procedure contains illustrations showing certain components removed to provide extra clarity.
The following step(s) applies to:
All vehicles
- Remove the generator.
Refer to: GENERATOR .
The following step(s) applies to:
Cold climate vehicles
- Remove the block heater.
Refer to: BLOCK HEATER .
The following step(s) applies to:
All vehicles
Remove the electrical connector.
Remove the Piston Cooling Jet (PCJ) Solenoid.