Piston Cooling Oil Jet Solenoid (G2130910): Installation
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
The following step(s) applies to:
All vehicles
-
- Install the Piston Cooling Jet (PCJ) Solenoid.
- Inspect the O-ring. Replace if damaged.
- Torque : 11Nm
- Connect the electrical connector.
The following step(s) applies to:
Cold climate vehicles
- Install the block heater.
Refer to: BLOCK HEATER .
The following step(s) applies to:
All vehicles
- Install the generator.
Refer to: GENERATOR .