LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 192 (Electronic Engine Controls - INGENIUM I4 2.0L Petrol -- XE/(760)) >> Electronic Engine Controls - INGENIUM I4 2.0L Petrol (G2006487) >> Removal And Installation >> Fuel Rail Pressure Sensor (G2289191) >> Installation

Fuel Rail Pressure Sensor (G2289191): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Authoring Template
  2. CAUTION: Make sure threads are clean and free from petrol.

    Install the fuel rail pressure sensor. Lubricate the threads with Molykote W15.

    Torque  : 38Nm 

  3. Connect the electrical connector to the fuel rail pressure sensor.
  4. Install the engine cover.

    Refer to: ENGINE COVER - INGENIUM I4 2.0L PETROL .

  5. Connect the startup battery ground cable.

    Refer to: SPECIFICATIONS .

scientia non olet · About LEMON Manuals