LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 192 (Electronic Engine Controls - INGENIUM I4 2.0L Petrol -- XE/(760)) >> Electronic Engine Controls - INGENIUM I4 2.0L Petrol (G2006487) >> Removal And Installation >> Cylinder Head Temperature Sensor (G2031747) >> Installation

Cylinder Head Temperature Sensor (G2031747): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Install a new sensor.
    • Install the cylinder head temperature sensor.

      Renew Part: Cylinder head temperature sensor Quantity: 1  .

      Torque  : 11Nm 

    • Install the retaining clip to the back of the electrical connector.
    • Connect the electrical connector.
  2. Install the intake air resonator.

    Refer to: INTAKE AIR RESONATOR .

scientia non olet · About LEMON Manuals