LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 192 (Electronic Engine Controls - INGENIUM I4 2.0L Petrol -- XE/(760)) >> Electronic Engine Controls - INGENIUM I4 2.0L Petrol (G2006487) >> Removal And Installation >> Cylinder Block Temperature Sensor (G2031746) >> Installation

Cylinder Block Temperature Sensor (G2031746): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Install a new sensor.
    • Install the cylinder block temperature sensor.

      Renew Part: Engine block temperature sensor Quantity: 1  .

      Torque  : 11Nm 

    • Connect the electrical connector.
  2. Install the generator.

    Refer to: GENERATOR .

scientia non olet · About LEMON Manuals