Cylinder Block Temperature Sensor
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
The cylinder block temperature sensor is located in a threaded hole on the left side of the cylinder block, between the generator and the electric throttle.
The sensor is a Negative Temperature Coefficient (NTC) type sensor with a 2 pin connection. There is 1 pin which receives a 5V reference voltage from the Powertrain Control Module (PCM) and the second pin provides a signal feedback to the PCM.