Air Conditioning Compressor - INGENIUM I4 2.0L Petrol (G2037323): Installation
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- Install the A/C compressor.
Torque : 25Nm
- Connect the electrical connector and the clip.
-
NOTE:
- Install new O-ring seals.
- Remove and discard the blanking caps.
- Install the new O-ring seals.
Renew Part: Air conditioning pipe to compressor O-ring seal(s) Quantity: 1 .
- Install the 2 nuts.
Torque : 9Nm
- Install the clip.
- Install the accessory drive belt.
Refer to: ACCESSORY DRIVE BELT
- Install the charge air radiator bracket.
Torque : 47Nm
- Install the 2 nuts.
Torque : 10Nm
- Install the 3 clips.
- Install the charge air radiator.
Refer to: CHARGE AIR COOLER
- Charge the A/C system.
Refer to: AIR CONDITIONING SYSTEM RECOVERY, EVACUATION AND CHARGING