Front Seat Recliner Motor (G1842035): Removal
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Some variation in the illustrations may occur, but the essential information is always correct.
- Removal steps in this procedure may contain installation details.
The following step(s) applies to:
All vehicles
- Refer to: FRONT ROW SEAT
-
CAUTION: A suitable tool must be used during this step to avoid damage to the head restraint retaining clips.
The following step(s) applies to:
Vehicles with heated front seats
-
WARNING:
- Do not probe supplemental restraint system (SRS) electrical connectors.
- The SRS electrical connectors are unique. DO NOT force, or attempt to connect electrical connectors to the wrong sockets.
NOTE: LH illustration shown, RH is similar. Torque : 7Nm
-
CAUTION: Care must be taken not to damage the component.
-
CAUTION: Care must be taken not to damage the component.
-
CAUTION:
- Care must be taken not to damage the component.
- Take extra care not to damage the surrounding components.
-
NOTE: Remove and discard the securing tie strap.
Release the hook from the seat frame, as illustrated.
-
NOTE: Repeat the procedure for the other side.
Torque : 35Nm