Front Row Seat SWITCHPACK - Project 8 (G2245713): Installation
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
-
- Install the front row seat switchpack.
- Install and tighten the 4 bolts.
Torque : 2Nm
-
- Connect the 2 electrical connectors.
- Install the front row seat outer valance assembly.
- Install and tighten the bolt.
Torque : 2Nm
- Connect the startup battery ground cable.
Refer to: STARTUP BATTERY DISCONNECT AND CONNECT
- Install the cover.
- Move the front row seat to the original position.