Front Row Seat Backrest Cover Trim Panel - Project 8 (G2260428): Installation
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
-
- Install the seat backrest cover outside trim.
- Install the 2 screws.
-
- Install the seat backrest cover inner trim.
- Install the 3 screws.
-
NOTE: Make sure the locating tabs are installed correctly.
Install the front row seat backrest cover trim panel to the seat assembly.
- Install the 2 upper seat backrest 4. cover screws.
- Install the 4 lower seat backrest cover screws.
-
- Install the side airbag.
- Install the 2 nuts.
Torque : 7Nm
-
- Connect the side airbag electrical connector.
- Secure the side airbag wiring harness clip.
- Install the seat head restraint foam.
- Install the front row seat backrest cover.