Front Row Seat - Project 8 (G2246143): Installation
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
-
CAUTION:
- Protect the surrounding paintwork to avoid damage.
- Protect the surrounding trim to avoid damage.
NOTE: This step requires the aid of another technician.Install the front row seat.
-
- Install the seatbelt pretensioner.
- Install and tighten the bolt.
Torque : 40Nm
- Connect the electrical connector.
-
- Secure the clip.
- Connect the 3 electrical connectors.
- Connect the startup battery ground cable.
Refer to: STARTUP BATTERY DISCONNECT AND CONNECT
-
- Install and tighten the 2 bolts.
Torque : 60Nm
- Move the front 6. row seat rearward.
-
- Install and tighten the 2 bolts.
Torque : 60Nm
- Install the cover.