Pinpoint Test K: Massage Seat Tests
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- K1: MASSAGE SEAT TEST 1
- Using the Jaguar Land Rover approved diagnostic equipment, perform routine - On Demand Self Test
- Check the relevant seat module for related DTCs
Are any relevant DTCs set?
Yes
Perform the relevant corrective action
No
GO to K2.
- K2: MASSAGE SEAT TEST 2 NOTE: The massage circuit current specification is 1.10A ± 10%.
- Connect an inductive ammeter to the massage master solenoid power circuit
- Set the seat massage function to on
Is the measured current less than specification?
Yes
Refer to the electrical circuit diagrams and check the seat massage circuits for open circuit, high resistance
No
Check the massage air cell hoses for blockages/leaks