Auxiliary Radiator (G2244101): Installation
WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
-
NOTE: An audible click is heard when the clips are fully latched.
- Install the auxiliary radiator assembly.
- Make sure the 3 clips are correctly installed.
- Install and tighten the 3 bolts.
Torque : 7Nm
- Connect the upper coolant hose.
- Connect the lower coolant hose.
- Install the front wheel arch liner.
Refer to: FRONT WHEEL ARCH LINER - PROJECT 8
- Vacuum fill the cooling system.
Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING