Exhaust System Center Section (G2270513): Installation
WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- Install the 2 new exhaust clamps.
Renew Part: Exhaust clamp Quantity: 2 .
-
CAUTION: Make sure the exhaust clamps are correctly seated over the ridges failure to follow this step may cause damage to the vehicle.
- With the aid of another technician install the exhaust system center section.
- Install and tighten the 2 exhaust clamps.
Torque : 55Nm
- Install the 4 mounting rubbers.
-
CAUTION: Make sure that the exhaust system center section is correctly fitted to the rear silencers.
- Reposition the rear silencers to the exhaust system center section.
- Install and tighten the 2 clamps.
Torque : 55Nm
- Install the rear undershield.
Refer to: REAR UNDERSHIELD - PROJECT 8