LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 178 (Engine - INGENIUM I4 2.0L Petrol -- XE/(760)) >> Engine - INGENIUM I4 2.0L Petrol (G2289429) >> Removal And Installation >> Oil Cooler (G1997941) >> Removal

Oil Cooler (G1997941): Removal

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
  • This procedure contains illustrations showing certain components removed to provide extra clarity.
  1. Raise and support the vehicle on a suitable 2 post lift.

    Refer to: LIFTING

  2. Remove the turbocharger.

    Refer to: TURBOCHARGER

  3. CAUTION: Be prepared to collect escaping coolant.
    G11306836Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Remove the oil cooler hose.

  4. CAUTION: Be prepared to collect escaping fluids.
    G11306837Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Remove the oil cooler.
    • Remove and discard the gasket.
scientia non olet · About LEMON Manuals