LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 178 (Engine - INGENIUM I4 2.0L Petrol -- XE/(760)) >> Engine - INGENIUM I4 2.0L Petrol (G2289429) >> Removal And Installation >> Crankshaft Front Seal (G1997931) >> Installation

Crankshaft Front Seal (G1997931): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION: Take extra care not to damage the seal.

    Using a suitable tool, install the front crankshaft oil seal.

    Special Tool(s): JLR-303-1628 

    Torque: 26 Nm 

  2. Install the crankshaft damper.

    Refer to: CRANKSHAFT PULLEY 

  3. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

scientia non olet · About LEMON Manuals