Engine Coolant Temperature Sensor (G2278271): Installation

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

Install the Engine Coolant Temperature (ECT) sensor.
Install the ECT sensor clip.
Connect the ECT sensor electrical connector.
Vacuum fill the coolant system.
Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING
Install the engine undershield.
Refer to: ENGINE UNDERSHIELD
Install the engine cover.
Refer to: ENGINE COVER - INGENIUM I4 2.0L DIESEL