Coolant Expansion Tank (G1785682): Installation

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

The following step(s) applies to:

All vehicles

- Connect the electrical connector and hose to the coolant expansion tank.
- Install the coolant expansion tank and bolt.
Connect the electrical connector and install the 6 clips.
The following step(s) applies to:

Vehicles with petrol engine
Connect the pipe to the coolant expansion tank.
The following step(s) applies to:

Vehicles with diesel engine
Connect the 2 pipes to the coolant expansion tank.
The following step(s) applies to:

All vehicles
CAUTION: Correct installation of the coolant expansion tank cap can be obtained by tightening the cap until 3 audible clicks are heard.

Fill the coolant expansion tank to the 'MAX' level mark.