LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Wiring Harnesses -- XE/(760)) >> Wiring Harnesses (G2261490) >> Description And Operation >> Wiring Harness (G1823735) >> Wiring Harness Repair, Including Supplementary Restraint System Firing Circuit Wiring >> Approved Electrical Wiring Harness Repair Methods

Approved Electrical Wiring Harness Repair Methods

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Several different types and sizes of terminal may be found in a single electrical connector housing.

It is necessary to identify:

  1. The conductor (wire) size of the affected wiring harness
  2. The electrical connector range from which the damaged wiring harness is to be removed
  3. The electrical terminal type

Use of the approved diagnostic tool will greatly assist in the quick identification of electrical connectors and faulty pin terminal(s).

Use the Electrical Wiring Harness Repair Relationship Table  to identify the correct splice connector to suit the wiring harness conductor (wire) size. This will relate to a suitable pre-terminated lead by the color of the insulation. The table also identifies the correct length of insulation to be stripped from the wiring harness lead.

scientia non olet · About LEMON Manuals