DTC U3000-55: Control Module - Not configured: Action
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
After updating the car configuration file, set the ignition to on and wait 30 seconds before clearing the DTCs
- Using the Jaguar Land Rover approved diagnostic equipment, check and up-date the car configuration file as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, reconfigure the anti-lock brake system control module with the latest level software calibration. Clear the DTC and retest