Anti-Theft - Active (G1818046): Operation: Notes

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

The BCM/GWM automatically arms and disarms the active anti-theft system when it operates the CDL via an external lock/unlock request - Smart Key lock/unlock switch press or Keyless Vehicle Exterior Lock switch press or unlock request via exterior handle pull.

On vehicles without a volumetric sensor, only the perimeter sensing is available to monitor the vehicle apertures.

When perimeter sensing is active, the BCM/GWM monitors aperture ajar switches located in the latch mechanisms of the front and rear doors, the tailgate and hood ajar micro switch, located in hood latch mechanism in the engine compartment.

When volumetric sensors are active, the BCM/GWM monitors the interior of the vehicle for movement using a volumetric sensor located in the front overhead console.