Rain Sensor (G1821227): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Make sure that the rain sensor is correctly installed.
Make sure that the windshield and rain sensor are not contaminated.
Make sure that the area is clean and free from foreign materials.

CAUTION: Make sure that the rain sensor is fully adheres to the windshield.

Install the rain sensor.
Connect the electrical connector.
Install the interior rear view mirror.
Refer to: INTERIOR REAR VIEW MIRROR
Allow 10 minutes before calibrating the rain sensor.
Calibrate the rain sensor using Jaguar Land Rover (JLR) approved diagnostic equipment.
General Equipment: Jaguar Land Rover approved diagnostic equipment