Headlamp Washer Pump (G1821226): Installation
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
-
CAUTION: Replace the grommet if damaged.
- Connect the headlamp washer hose.
- Install the headlamp washer pump into the grommet.
- Install the pump clip.
-
- Connect the electrical connector to the pump.
- Install the wiring harness clip.
- Install the front right wheel arch liner.
Refer to: RADIATOR SPLASH SHIELD