LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Exterior Lighting -- XE/(760)) >> Exterior Lighting (G1822510) >> Diagnosis And Testing >> Reversing Lamps (G1561403) >> Inspection And Verification

Inspection And Verification

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Diagnosis by substitution from a donor vehicle is NOT  acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle.
  1. Verify the customer concern
  2. Visually inspect for obvious signs of damage and system integrity
    VISUAL INSPECTION

    MECHANICAL ELECTRICAL
    • Reversing lamp condition and installation
    • Bulb and installation
    • Bulb holder and installation
    • Fuses
    • Wiring harness
    • Loose or corroded connector(s)
    • Reversing lamp relay
    • Battery junction box
    • Central junction box
    • Transmission control module
    • CAN circuits
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step
  4. If the cause is not visually evident verify the symptom and refer to the Symptom Chart, alternatively check for Diagnostic Trouble Codes (DTCs) and refer to the DTC Index