LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Exterior Lighting -- XE/(760)) >> Exterior Lighting (G1822510) >> Diagnosis And Testing >> Headlamps (G1823113) >> Symptom Chart

Symptom Chart

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
SYMPTOM POSSIBLE CAUSES ACTION
Headlamp(s) wet (internally)
  • Condensation
  • Water ingress
Headlamp(s) inoperative
  • Body system fault
  • Headlamp bulb failed
  • Lighting control switch fault
  • Headlamp circuit short circuit to ground, short circuit to power, open circuit, high resistance
  • Using the manufacturer approved diagnostic system, check the body control module for related Diagnostic Trouble Code(s) and refer to the relevant DTC  index
  • Install a new headlamp bulb
  • Install a new lighting control switch
  • Refer to the electrical circuit diagrams and check the headlamp circuit for short circuit to ground, short circuit to power, open circuit, high resistance
Headlamp(s) dim
  • Body system fault
  • Headlamp bulb failed
  • Headlamp bulb incorrect specification
  • Headlamp circuit high resistance
  • Using the manufacturer approved diagnostic system, check the body control module for related Diagnostic Trouble Code(s) and refer to the relevant DTC  index
  • Install a new headlamp bulb
  • Install a new headlamp bulb
  • Refer to the electrical circuit diagrams and check the headlamp circuit for high resistance
Headlamp(s) stuck on
  • Body system fault
  • Lighting control switch fault
  • Headlamp circuit short circuit to power
  • Using the manufacturer approved diagnostic system, check the body control module for related Diagnostic Trouble Code(s) and refer to the relevant DTC  index
  • Install a new lighting control switch
  • Refer to the electrical circuit diagrams and check the headlamp circuit for short circuit to power
Headlamp low/high beam switching function inoperative
  • Body system fault
  • Lighting control switch fault
  • Headlamp shutter circuit short circuit to ground, short circuit to power, open circuit, high resistance
  • Headlamp internal failure - Shutter mechanism
  • Using the manufacturer approved diagnostic system, check the body control module for related Diagnostic Trouble Code(s) and refer to the relevant DTC  index
  • Install a new lighting control switch
  • Refer to the electrical circuit diagrams and check the headlamp shutter circuit for short circuit to ground, short circuit to power, open circuit, high resistance
  • Install a new headlamp
Warning indicator(s) inoperative
  • Body system fault
  • Instrument cluster fault
  • Lighting control switch fault
  • Using the manufacturer approved diagnostic system, check the body control module for related Diagnostic Trouble Code(s) and refer to the relevant DTC  index
  • Using the manufacturer approved diagnostic system, check the instrument cluster for related Diagnostic Trouble Code(s) and refer to the relevant DTC  index
  • Install a new lighting control switch
Headlamp leveling system inoperative
  • Adaptive front lighting system fault
  • Body system fault
  • Adaptive damping system fault
  • Headlamp internal failure - Leveling motor/linkage
  • Using the manufacturer approved diagnostic system, check the body control module for related Diagnostic Trouble Code(s) and refer to the relevant DTC  index
  • Using the manufacturer approved diagnostic system, check the integrated suspension control module for related Diagnostic Trouble Code(s) and refer to the relevant DTC  index
  • Install a new headlamp
Headlamp alignment incorrect
  • Adaptive front lighting system fault
  • Body system fault
  • Adaptive damping system fault
  • Headlamp internal failure - Leveling motor/linkage
  • Using the manufacturer approved diagnostic system, check the body control module for related Diagnostic Trouble Code(s) and refer to the relevant DTC  index
  • Using the manufacturer approved diagnostic system, check the integrated suspension control module for related Diagnostic Trouble Code(s) and refer to the relevant DTC  index
  • Install a new headlamp