Battery Care Requirements (G2283223): Equipment
WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
All equipment used must be functionally capable of meeting the compliance requirements. Please refer to the approved equipment document (JLR 000015).
In the case of startup or auxiliary batteries installed to a new vehicle at the retailer, battery condition should be measured using the appropriate hand-held Midtronics tester as follows:
| LEAD ACID BATTERY TYPE | BATTERY TESTER | BATTERY TESTER AND CHARGER |
|---|---|---|
| AGM and flooded |
|
|
The test results must be recorded on the 'New Vehicle Storage Form' which is part of the 'New Vehicle Storage' document.
NOTE:
All equipment must be calibrated.
For additional information, Refer to: NEW VEHICLE STORAGE FORM