LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 158 (Front Drive HALFSHAFTS -- XE/(760)) >> Front Drive HALFSHAFTS (G2162864) >> Removal And Installation >> HALFSHAFT Support Bracket (G1899510) >> Installation

HALFSHAFT Support Bracket (G1899510): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION: Make sure all the mating faces are clean and free from foreign material.

    Renew the O-ring seal.

    Renew Part: Halfshaft support bracket o-ring seal  Quantity: 1. 

  2. Install the starter motor bracket and the 3 retaining bolts.

    Torque  : 25Nm 

  3. Reposition the wiring harness and secure the connector and retaining clip.
  4. Install the halfshaft support bracket.

    Torque  : 25Nm 

  5. Install the front halfshaft.

    Refer to: FRONT HALFSHAFT 

  6. Install the air defector.

    Refer to: ENGINE UNDERSHIELD

scientia non olet · About LEMON Manuals