LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 157 (Body Panel System - Front End Body Panels -- XE/(760)) >> Front End Body Panels (G1817284) >> Removal And Installation >> Secondary Bulkhead Left Outer Panel - Project 8 (G2248499) >> Installation

Secondary Bulkhead Left Outer Panel - Project 8 (G2248499): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
    1. Install the secondary bulkhead left outer panel.
    2. Install the retaining clip.
    3. Install and tighten the 2 bolts.

      Torque  : 6Nm 

    1. Install the engine compartment brace.
    2. Install the grommet.
    3. Install and tighten the 4 bolts.

      Torque  : 55Nm 

  3. Install the cowl panel.

    Refer to: COWL PANEL 

scientia non olet · About LEMON Manuals