LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 157 (Body Panel System - Front End Body Panels -- XE/(760)) >> Front End Body Panels (G1817284) >> Removal And Installation >> Secondary Bulkhead Left Inner Panel - Project 8 (G2248500) >> Installation

Secondary Bulkhead Left Inner Panel - Project 8 (G2248500): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
    1. Install the secondary bulkhead left inner panel.
    2. Install and tighten the 2 bolts.

      Torque  : 6Nm 

  2. Install the secondary bulkhead left outer panel.

    Refer to: SECONDARY BULKHEAD LEFT OUTER PANEL - PROJECT 8 

scientia non olet · About LEMON Manuals