LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 157 (Body Panel System - Front End Body Panels -- XE/(760)) >> Front End Body Panels (G1817284) >> Removal And Installation >> Hood Latch Panel - Project 8 (G2249571) >> Installation

Hood Latch Panel - Project 8 (G2249571): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
    1. Install the hood latch panel.
    2. Install and tighten the 4 bolts.

      Torque  : 25Nm 

  2. NOTE: Repeat this step for the other side.
    1. Install the bracket.
    2. Install and tighten the 2 bolts.

      Torque  : 25Nm 

    1. Install the bracket.
    2. Install and tighten the 4 bolts.
    3. Install and tighten the nut.

      Torque  : 10Nm 

    1. Install the bracket.
    2. Install and tighten the 4 bolts.

      Torque  : 10Nm 

    3. Install and tighten the nut.

      Torque  : 10Nm 

    1. Release the trim.
    2. Install the air intake.
    3. Secure the 4 clips.
    1. Secure the clip and connect the electrical connector.
    2. Install the right hood latch.
    3. Install and tighten the 2 bolts.

      Torque  : 10Nm 

    4. Secure the cable.
    1. Install the left hood latch.
    2. Install and tighten the 2 bolts.

      Torque  : 10Nm 

    3. Secure the cable.
  8. NOTE: Repeat this step for the other side.
    1. Install and tighten the bolt.

      Torque  : 10Nm 

scientia non olet · About LEMON Manuals