LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 155 (Electronic Engine Controls - V6 S/C 3.0L Petrol -- XE/(760)) >> Electronic Engine Controls - V6 S/C 3.0L Petrol (G1818564) >> Removal And Installation >> Mass Air Flow Sensor (G1818356) >> Installation

Mass Air Flow Sensor (G1818356): Installation

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the new O-ring seal.

    Renew Part: Mass air flow sensor O-ring seal Quantity: 1  .

  2. Install the Mass Air Flow (MAF) sensor.

    Torque  : 1.9Nm 

  3. Connect the MAF electrical connector.
  4. Secure the left air intake pipe.

    Torque  : 3.3Nm 

  5. Install the engine cover.

    Refer to: ENGINE COVER - V6 S/C 3.0L PETROL

scientia non olet · About LEMON Manuals