LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 155 (Electronic Engine Controls - V6 S/C 3.0L Petrol -- XE/(760)) >> Electronic Engine Controls - V6 S/C 3.0L Petrol (G1818564) >> Removal And Installation >> Left Mid Catalyst Heated Oxygen Sensor (G1818190) >> Installation

Left Mid Catalyst Heated Oxygen Sensor (G1818190): Installation

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: If the original sensor is to be installed, apply lubricant meeting specification ESE-M12A4-A to the thread of the sensor.
    • Using the special tool install the Heated Oxygen Sensor (HO2S).

      Special Tool(s): JLR-303-1666 

      Torque  : 48Nm 

    • Connect the electrical connect and secure the retaining clips.
  2. Install the engine undershield.

    Torque  : 7Nm 

scientia non olet · About LEMON Manuals