LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 155 (Electronic Engine Controls - V6 S/C 3.0L Petrol -- XE/(760)) >> Electronic Engine Controls - V6 S/C 3.0L Petrol (G1818564) >> Removal And Installation >> Engine Coolant Temperature Sensor (G1818166) >> Installation

Engine Coolant Temperature Sensor (G1818166): Installation

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the engine coolant temperature sensor and connect the electrical connector.
  2. Install the secondary bulkhead panel right.

    Refer to: SECONDARY BULKHEAD RIGHT PANEL - V6 S/C 3.0L PETROL

  3. Fill the coolant system.

    Refer to: COOLING SYSTEM DRAINING AND VACUUM FILLING

  4. Install the engine cover.

    Refer to: ENGINE COVER - V6 S/C 3.0L PETROL

scientia non olet · About LEMON Manuals