LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (Fuel Charging And Controls - INGENIUM I4 2.0L Petrol -- XE/(760)) >> Fuel Charging And Controls - INGENIUM I4 2.0L Petrol (G2006450) >> Removal And Installation >> Fuel Pump Driver Module (G1822877) >> Removal

Fuel Pump Driver Module (G1822877): Removal

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Disconnect the battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

  2. CAUTION: Take extra care not to damage the wiring harnesses.
    G11307627Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
  3. G11307628Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
  4. G11307629Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
  5. G11307630Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
  6. G11307631Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Torque  : 11Nm 

scientia non olet · About LEMON Manuals