LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Engine - V6 S/C 3.0L Petrol -- XE/(760)) >> Engine - V6 S/C 3.0L Petrol (G2289428) >> Removal And Installation >> Fuel Pump Camshaft (G1851649) >> Removal

Fuel Pump Camshaft (G1851649): Removal

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Some illustrations may show the engine removed for clarity
  1. Disconnect the battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

  2. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  3. Refer to: OIL PAN EXTENSION 
  4. G11286982Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
  5. G11287044Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Make sure the crankshaft is at the timed position.

  6. CAUTION: Using a suitable tool, lock the component.
    G11287051Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
  7. CAUTION: Take extra care not to damage the surrounding components.
    G11299712Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
  8. G11299713Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
  9. CAUTION: Take extra care when removing the component, prevent damage to the mating faces.
    G11299714Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
scientia non olet · About LEMON Manuals