LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Engine - V6 S/C 3.0L Petrol -- XE/(760)) >> Engine - V6 S/C 3.0L Petrol (G2289428) >> Removal And Installation >> FLEXPLATE (G1921205) >> Removal

FLEXPLATE (G1921205): Removal

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Removal steps in this procedure may contain installation details.
  • Some components shown removed for clarity.
  1. Refer to: TRANSMISSION - V6 S/C 3.0L PETROL AWD Installation

    Refer to: TRANSMISSION - V6 S/C 3.0L PETROL RWD Removal

  2. CAUTION:
    • The bolts can only be used 3 times, mark the bolts with a center punch. If 2 punch marks are visible, discard the bolts.
    • Make sure that no components fall off during removal.
    • Note the position of the bolts, prior to removal.
    NOTE:
    • Make sure the crankshaft and flexplate mating faces are clean before installation.
    • Make sure that the crankshaft is not rotated.
    G11286688Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Install the special tool.

    Special Tool(s): JLR-303-1304 

scientia non olet · About LEMON Manuals