Valve Clearance Adjustment(G1851592): Adjustment

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

Remove the camshafts.
Refer to: LEFT CAMSHAFT

Refer to: RIGHT CAMSHAFT
- Do not use a magnet to remove the tappet.
- Use the following formula to calculate the required bucket thickness. Original thickness + measured clearance - desired clearance = required bucket thickness.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Remove the tappet and measure the thickness checking it against the specification table, replace if necessary.

Refer to: SPECIFICATIONS

Renew Part: Valve graded tappet Quantity: 1 .