LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 142 (Body Panel System - Front End Body Panels) >> Front End Body Panels (G1817284) >> Removal And Installation >> Secondary Bulkhead Right Panel - INGENIUM I4 2.0L Petrol (G2020325) >> Installation

Secondary Bulkhead Right Panel - INGENIUM I4 2.0L Petrol (G2020325): Installation

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
    • Install the secondary bulkhead right panel.
    • Install and tighten 5 bolts

      Torque: 5.4 Nm 

  2. Connect the 2 electrical connectors.

    Torque: 3.6 Nm 

    • Install the engine compartment brace.
    • Install and tighten the 4 bolts.

      Torque: 55 Nm 

  4. Install the cowl panel.

    Refer to: COWL PANEL .

  5. Install the engine cover.

    Refer to: ENGINE COVER - INGENIUM I4 2.0L PETROL (G2020024) .

  6. Connect the startup battery ground cable.

    Refer to: Battery and Charging System article (General Information, Specifications).

scientia non olet · About LEMON Manuals