Secondary Bulkhead Left Panel - INGENIUM I4 2.0L Petrol (G2020320): Installation

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

- Install the secondary bulkhead left panel.
- Install and tighten the 3 bolts.
  Torque: 5.4 Nm
Connect the brake booster vacuum hose quick release connector.
- Install the engine compartment brace.
- Install and tighten the 4 bolts.
  Torque: 55 Nm
Install the secondary bulkhead right panel.
Refer to: SECONDARY BULKHEAD RIGHT PANEL - INGENIUM I4 2.0L PETROL .
Connect the startup battery ground cable.
Refer to: Battery and Charging System article (General Information, Specifications).